› › › 文章

serverstatus中文版，一个优秀的云探针

A-A+
1,624次浏览
  编辑于：2018-05-18
文章目录

介绍

ServerStatus中文版是一个酷炫高逼格的云探针、云监控、服务器云监控、多服务器探针~。
在线演示：https://tz.cloudcpp.com
本程序的使用需用nginx，直接使用lnmp.org上的一键安装即可，不需要安装mysql.

安装服务端

生成服务端程序需要make,gcc,g++这三个依赖，如果没有安装的话，执行：

apt-get update && apt-get install gcc g++ make wget -y

如果你已经安装了，那么直接执行下面的命令即。

wget --no-check-certificate https://github.com/cppla/ServerStatus/archive/master.tar.gz -O /root/ServerStatus.tar.gz
tar -zxvf /root/ServerStatus.tar.gz
mv /root/ServerStatus-master /root/ServerStatus
cd /root/ServerStatus/server
make
./sergate

如果没错误提示，OK，ctrl+c关闭；如果有错误提示，检查35601端口是否被占用
拷贝ServerStatus/status到你的网站目录，

sudo cp -r /root/ServerStatus/web/* /home/wwwroot/你的域名

修改服务端配置配置

修改config.json文件，注意username, password的值需要和客户端对应一致

{"servers":
	[
		{
			"username": "s01",
			"name": "Mainserver 1",
			"type": "Dedicated Server",
			"host": "GenericServerHost123",
			"location": "Austria",
			"password": "some-hard-to-guess-copy-paste-password"
		},
	]
}

运行服务端：
web-dir参数为上一步设置的网站根目录，务必修改成自己网站的路径

cd /root/ServerStatus/server
./sergate --config=config.json --web-dir=/home/wwwroot/default

客户端配置设置

客户端有两个版本，client-linux为普通linux，client-psutil为跨平台版，普通版不成功，换成跨平台版即可。
这里只介绍linux版本的配置，如果需要跨平台，请参考：https://github.com/cppla/ServerStatus
客户端是一个python编写的单文件，可以不用下载serverstatus的全部文件

wget https://raw.githubusercontent.com/cppla/ServerStatus/master/clients/client-linux.py -O /root/client-linux.py
vim client-psutil.py
#修改SERVER地址，username帐号， password密码

打开云探针页面，就可以正常的监控。接下来把服务器和客户端脚本自行加入开机启动，或者进程守护，或以后台方式运行即可！例如： nohup python client-linux.py &

脚本

开机启动可以采用cron的@reboot或者写入/etc/rc.local文件。
在支持systemd（debian8/ubuntu16/centos7以上）的系统中可以用以下的方法:
服务端：
添加配置（全文复制并粘贴）

echo '[Unit]
Description=serverstatus
After=network.target
     
[Service]
ExecStart=/root/ServerStatus/server/sergate --config=/root/ServerStatus/server/config.json --web-dir=/home/wwwroot/status
Restart=always
    
[Install]
WantedBy=multi-user.target' > /etc/systemd/system/serverstatus.service

启动程序并设置开机自启

systemctl enable serverstatus && systemctl start serverstatus

客户端（全文复制并粘贴）

echo '[Unit]
Description=serverstatus
After=network.target
     
[Service]
ExecStart=/usr/bin/python /root/client-linux.py
Restart=always
    
[Install]
WantedBy=multi-user.target' > /etc/systemd/system/cstatus.service

启动程序并设置开机自启

systemctl enable cstatus && systemctl start cstatus

快速添加

服务端

服务端快速添加配置，

wget --no-check-certificate https://files.zorz.cc/addserverstatus.sh -O addserverstatus.sh && bash addserverstatus.sh

代码预览

#!/bin/bash
server_conf="/root/ServerStatus/server/config.json"

set_config(){
read -p "Please enter username:" username_s
[[ -z $username_s ]] && echo "username is needed" && exit 1
grep username ${server_conf} | sed s/[[:space:]]//g | cut -d ":" -f 2 | tr -d '["][,]' | while read line ; do 
[[ "$line" = "$username_s" ]]  && echo "Username has been used" && exit 89
done
[[ $? -eq 89 ]] && exit 1
read -p "Please enter password (default is zorz.cc):" password_s
password_s=${password_s:-zorz.cc} 
read -p "Please enter location (default is us):" location_s
location_s=${location_s:-us} 
read -p "Please enter type (default is kvm):" type_s
type_s=${type_s:-kvm} 
read -p "Please enter name:" name_s
[[ -z $name_s ]] && echo "name is needed" && exit 1
}

Add_ServerStatus_server(){
	sed -i '3i\  },' ${server_conf}
	sed -i '3i\   "disabled": false' ${server_conf}
	sed -i '3i\   "location": "'"${location_s}"'",' ${server_conf}
	sed -i '3i\   "host": "'"None"'",' ${server_conf}
	sed -i '3i\   "type": "'"${type_s}"'",' ${server_conf}
	sed -i '3i\   "name": "'"${name_s}"'",' ${server_conf}
	sed -i '3i\   "password": "'"${password_s}"'",' ${server_conf}
	sed -i '3i\   "username": "'"${username_s}"'",' ${server_conf}
	sed -i '3i\  {' ${server_conf}
	echo  "done"
}
set_config
Add_ServerStatus_server

添加完成之后需要重新启动serverstatus，如果是systemd的话那么systemctl restart serverstatus

客户端

客户端快速添加配置

wget --no-check-certificate https://files.zorz.cc/clientstatus.sh -O clientstatus.sh && bash clientstatus.sh

代码预览

#!/bin/bash

client_file="/root/client-linux.py"
read -p "Please enter same username with server:" username_c
[[ -z $username_c ]] && echo "same username is needed" && exit 1
read -p "Please enter same password with server (default is zorz.cc):" password_c
password_c=${password_c:-zorz.cc} 
read -p "Please enter server address (domain or ip) :" server_address
[[ -z $server_address ]] && echo "server address is needed" && exit 1
wget --no-check-certificate https://raw.githubusercontent.com/cppla/ServerStatus/master/clients/client-linux.py -O /root/client-linux.py
[[ -z $(which python) ]] && apt-get update && apt-get install python -y
sed -i 's/'"127.0.0.1"/"${server_address}"'/' ${client_file}
sed -i 's/USER = "s01"/USER = "'"${username_c}"'"/' ${client_file}
sed -i 's/USER_DEFAULT_PASSWORD/'${password_c}'/' ${client_file}
echo '[Unit]
Description=serverstatus
After=network.target
     
[Service]
ExecStart=/usr/bin/python /root/client-linux.py
Restart=always
    
[Install]
WantedBy=multi-user.target' > /etc/systemd/system/cstatus.service
systemctl start cstatus && systemctl enable cstatus
echo done

这里的脚本主要是我自己用的，所以只实现了添加配置这个功能，如果有需要的话，可以留言给我，我可以完善这个脚本的功能。
参考链接：
https://github.com/cppla/ServerStatus
https://doub.io/shell-jc3/

评论加载中